HOW TO REPLACE CRACKED OR BROKEN SCREEN ON BLACKBERRY Z10.
Without Much Sentence, this Technical tutorial will help you replace the and also, Fixed Some
BlackBerry Z10 Technical aspects
a. BlackBerry Z10 LCD Screen
b. BlackBerry Z10 Touch Screen
c. BlackBerry Z10 Rear Housing
d. BlackBerry Z10 Middle Plate
e. BlackBerry Z10 Charging Port
f. BlackBerry Z10 Ear Speaker Replacement and many more
==>CASE STUDIES ALERT:
This Technical Tutorial was Written by a Mobile Phone Repair
Service man Located in my area, After
Sharing this with me, i later paid him
to implement it on a customer's Mobile Phone (blackberry Z10) and it
was Confirmed and tested Working, So i decided to Share
the Steps in Details with You.(You can put it into practice and get a better
==>Recommended Tools Required For This Tutorial:
=> A Torx 4 screwdriver.
=> Any 0.8×40mm Pentalobe
=>A Case open tool and Tweezers. .....For More Details and
info about the above listed tools, use the
Step by Step Instructions:
1. Switch off your Blackberry Z10 Mobile Phone and Remove the Battery Door, Take out the battery door
and Remove 9 screws on the rear housing.
2. Use theTorx 4 screwdriverto
remove 9 screws on the rear housing of
the blackberry z10.
3. Remove the 2 screws at the left
edge side of the blackberry.
4. Next, Use the0.8×40mm Pentalobe screwdriver to
dissemble, remove the 2 screws at the left edge side and
Open the clips on the four corners
of the blackberry. also, Make sure to Remove the rear housing
5. After that, Use acase open tool to open the clips on the four
corners. then you remove the complete rear housing from the
PLEASE ACCEPT MY APPOLOGY FOR
COMPLETE POST, DUE TO SPAMMING PRIVACY
OF LINKS. I DECIDED TO CUT THIS POST INTO LIMIT. BUT YOU CAN
STILL CHECK MY BLOG AT HTTP://WWW.OTECHGUIDE.COM FOR THE